PPM-4100

Seed Pelleting Pan

This pan coater is designed for pelleting commercial vegetable seeds, typically ranging from 250,000 to 1.000,000 seeds.

Irregularly shaped seeds such as lettuce, celery, carrot, and onion, can be difficult or impossible to sow mechanically in their natural form. By applying binders and fine powders (fillers) in our pelleting pan, the size, shape, and weight of the seeds can be modified. This technology transforms small or irregular seeds into larger, uniform, spherical pellets, making them suitable for mechanical sowing using vacuum planters or for direct field sowing.

During the pelleting process, a controlled quantity of seeds rotates inside a smooth, angled Ø965 (37 ⁶³/₆₄’) pan. The rotation moves the seed bed upward along the pan wall until gravity causes the seeds to cascade back down in an avalanche-like flow. A liquid binder is applied through a dosing nozzle, while fine filler powders—such as limestone, talc, or clay—are manually introduced into the seed flow. The combination of binder and powder gradually builds up the coating around each seed, producing uniform, spherical pellets.

The process is operator-controlled. A skilled operator must carefully balance several parameters, including pan rotation speed, pan tilt angle, binder spray rate, and filler powder feed rate. Depending on the seed type and desired pellet size, a typical pelleting process can take 1–2 hours.

After pelleting, the seeds need to be sized (calibrated) and rapidly dried under controlled conditions to achieve a quality final product.

SPH can supply the equipment for these subsequent processing steps, including sizing/calibration and drying. However, SPH does not offer the seed-pelleting technology itself, nor the binders, coating materials, or specific pelleting formulations.

Product group, process:
Pelleting, Seed Pelleting Pan

Specifications

Capacity: ± 1.000.000 pellets – Pan Ø 965 mm
Which seed station: Processing
Process type: Batch
Operator control level: Semi-automated
Process time: ± 2 hours
Diameter pan: Ø965 mm

Service request

Leave your contact details and upload your files. We will get back to you as soon as possible.

Sign up for our newsletter

Do you want to stay informed of our company, current developments and the products we make? Then sign up!

Website: www.seedprocessing.com and all child pages;
User: visitors to the website;
Company: Seed Processing Holland the authorized publisher of the web page;

The following applies to our website. By using the website you agree to this disclaimer.

  • Seed Processing Holland regularly updates the content of the website and updates the website regularly. Despite these efforts, content on this website may be incomplete or out of date.
  • Seed Processing Holland gives no guarantee whatsoever about the correctness or completeness of the information consulted on this website.
  • Seed Processing Holland does not guarantee the security of our website and can therefore not be held liable for any damage suffered directly or indirectly from the use of our website.
  • Seed Processing Holland is not responsible for third party pages linked to.
  • Seed Processing Holland provides information on its website without any warranty or guarantee. No rights can be derived in any way from the information on the website.
  • Seed Processing Holland cannot be held liable for any damage whatsoever resulting from the use of the information on our website.
  • Seed Processing Holland will change or discontinue the website at its sole discretion and at any time. Seed Processing Holland cannot be held liable for the consequences of changes or termination on/off its website.
  • User is responsible for the use of all information provided on our website.